top of page
prodotti-texa-RCM-top.jpg

RCM

Rev counter for motorcycles

Discover RCM
REVOLUTION COUNTER (for) MOTORBIKE
prodotti-texa-RCM-prod.jpg
prodotti-texa-RCM-pres.jpg

RCM

RCM (the Revolution Counter for Motorcycles) is a precision tool designed by TEXA to measure engine speed on large and small motorcycles.

Accurate measurement of engine speed is essential to ensure conformity to the latest MCTCNet 2 test methods.

RCM lets you measure engine speed without connecting any cables or sensors to the bike, and therefore reduces the time taken for authorised test centres to set up and run tests.

Simple, automatic measurement

RCM uses an integrated antenna to analyse ignition frequency at the engine’s spark plugs.

It does not need cables and is fully autonomous thanks to rechargeable batteries. A keypad lets you select the number of cylinders and the engine type (2 or 4 stroke), while a practical graphic screen displays measured engine speed.

A green LED on the tool lights to confirm the correct reading of engine speed. Measurements can be transmitted to the test centre’s PC over a Bluetooth link or via an RS232 serial cable.

prodotti-texa-RCM-misura.jpg
Technical Specifications

DISPLAY
64×128 LCD with backlighting

 

POWER SUPPLY
3,7 V – 1000 mAh internal lithium battery

 

AUTONOMY
7 hours, typical use

 

MEASUREMENT RANGE
0 ÷ 9990 rpm

 

TEMPERATURE SENSOR
– 20 °C ÷ 200 °C

ENVIRONMENTAL
Operating temperature: – 10 °C ÷ 50 °C
Storing temperature: – 20 °C ÷ 60 °C
Temperature while charging: 0 °C ÷ 45 °C
Storage and operation moisture: 10 % ÷ 80 % without condensation

 

DIMENSIONS
204x110x117 mm

 

WEIGHT
290 g.

GALLERY
bottom of page